For
you chrome seekers, the folks at I.L. Motorsport now have chrome for your NC
style bar - perfectly coordinated with their other NC chromed bits.
Supplied in a set of two, including everything required for a 5 minutes installation.
For more information: I.L Motorsport
(Added 6/17/07)
I.L.Motorsport
chromed needle caps have a perfect fit and finish. Within a few minutes, you
can change your interior to a brand new look. Caps fit perfectly over the existing
caps.
For more information: I.L Motorsport
(Added 5/29/07)
I.L.
Motorsport brings us the finest defroster cover you can find for your Mazda
MX-5 NC. This cover fits like a second skin on your existing black defroster
vent and changes it to a perfect chromed finish. Simple installation using 3M
double sided tape.
For more information: I.L Motorsport
(Added 5/29/07)
Our
extra wide armrest offer both driver and passenger comfort. No need to elbow
wrestle over the soft cushiony armrest, now there is room for two. The armrest
is fitted to the center console without the use of any screws. It can be fitted
in a forward position allowing the use of the front cup holder, or it can be
fitted in the rear position allowing use of both cup holders.
For more information: www.miatamania.com
(Added 5/18/07)
If
you have to run a front license plate then you need Cobalt’s license plate
mounting kit. By relocating the license plate you create a unique look and the
grille is no longer covered, allowing maximum air flow to the radiator. The
mounting kit has 3 height positions to choose from – low, medium and high.
For more information: www.miatamania.com
(Added 5/16/07)
Enhance
your safety by adding brake light pulsing to your third brake light. The brake
light pulser module connects to your center high mount brake light (third brake
light) and automatically pulses it when you apply your brakes. The light will
pulsate on and off for about a second, then stay on steady for as long as you
press the brake pedal. Incorporated in the pulser is the "Delay-Repeat"
circuit, which requires the brake lights to be off for at least 15 seconds before
the cycle can be restarted. So, if you are in bumper-to-bumper traffic, the
brake light isn't always pulsing.
For more information: www.miatamania.com
(Added 5/16/07)
New
chromed inner door cups from I.L. Motorsport come in a one piece version for
your Mazda NC from 2006 and later.
Very easy to install with a 3M double side tape on the back. Beautiful triple chromed finish.
For more information: I.L Motorsport
(Added 5/4/07)
Raven
Wing Performance is proud to introduce THE CALIFORNIA POP-TOP™ - cockpit
covers for the 1990 to 2005 Miata and 2006 & 2007 MX-5.
The California PopTop™ cleanly fits your Miata whether the top is up or
down. Its patented fastening design, with mirror pockets, firmly attaches the
PopTop to your Miata without using a series of straps and hooks - and stays
put even in the wind!
Made of DuPont™ Tyvek®, the PopTop resists water penetration yet is
breathable, has a built-in anti-theft feature, an extremely small storage package,
and is ergonomically designed so it can be installed or removed in less than
a minute.
PopTop provides full window coverage, and blocks 99.8% of the sun's damaging
UV rays; virtually eliminating solar heat build-up within your Miata's interior.
It also provides winter-time protection from rain, dew, frost, and even snow!
Pop-Top comes complete with instructions and is backed by a 3-year warranty.
For more information: Raven Wing Performance
(Added 5/3/07)
Robbins' Streamline Economy Zipperless Tops for 90-05 Miatas are made to the
exact pattern of the New 2006 MX-5. This design eliminates the deck seams (front
to back seams above the doors) and the rear window panel standard on 90-05 Miatas.
This makes for an outstanding looking top that is sleek and smooth. Manufacturing
this top is easier, so it is a great value. Tops feature a zipperless design
so putting your top up and down is simplified. Glass window tops incorporate
a Heater/Defroster glass window. 90-97 owners with a hardtop can now enjoy a
defroster rear window in their soft top. Plastic window tops feature heat sealed
seams, not sewn, for strength and longevity.
Manufactured to Robbins' industry leading standards for quality. Superior fit, quality and value including a 3-year warranty.
For more information: www.miatamania.com
(Added 4/28/07)
Miata
power fanatics can rejoice, “IT” has arrived. Moss Motors' MP62 based
supercharger system was designed for the Miata enthusiast that wants to make
serious horsepower and torque with plenty of room available for significant
upgrades in power.
The entire system is designed around the Eaton MP62 Supercharger. The MP62 is a roots-type positive displacement blower that delivers instant boost at any RPM. Integrated into the MP62 supercharger is a boost bypass valve. When cruising, the bypass valve opens and re-circulates the air. This allows for fuel economy similar to stock. Put the hammer down and the bypass valve shuts immediately delivering instant boost to your Miata's engine. Every part in this system, including the Eaton supercharger, is warranted by Moss Motors for two years from the date of purchase.
Fuel enrichment under boost is provided by the PowerCard Pro. Moss Motors and Dobeck Performance have spent the last several years working together to create the most compact and very powerful - PowerCard Pro. The philosophy is simple, work in harmony with the factory ECU and simply add fuel where necessary only under boost. This philosophy will quickly become apparent the first time you drive your newly MP62 supercharged Miata. Instant boost, seamless power and no driveability quirks. A steady idle and nothing but a smooth delivery of boosted power that only the PC Pro can deliver. Another great PC Pro feature is real time fuel curve manipulation. Vast adjustment is available by simply targeting the appropriate zone and making a few clicks on the easy to use push button interface.
For more information: www.miatamania.com
(Added 4/28/07)
I.L.
Motorsport was looking to create a front bumper with a look similar to the MPS
version from Mazda. Designed for cars with or without Xenon lighting, the washer
nozzles and plate holes are marked in the bumper and can be easily cut out.
The bumpers are ready to paint and do not need addtional modifications.
The grill is not
additional and can be ordered in silver or black. (Close-up
animation)
For more information: I.L Motorsport
(Added 4/28/07)
The
new Satin Stretch car cover from Moss Motors is like a silky, sexy, black dress
for your Miata - it shows every curve. Satin Stretch custom car covers are made
for Miatas parked indoors, and for owners who want nothing but the best for
their vehicle. The material has Lycra fibers that stretch in every direction,
mirroring every perfect contour of your Miata. The inner liner is the softest
fleece available - specially designed not to rub off on convertible tops. 90-05
models are grey, 06-07 are black.
For more information: www.miatamania.com
(Added 4/25/07)
Do
you find yourself hot and uncomfortable even though the top is down? Are you
constantly trying to scoop in air you’re your hand from above the windshield
or through the window? With the Cool Breeze Scoop™ you will have fresh
outside air being forced in over the console and into the foot wells and cooling
you below the waist. The Cool Breeze Scoop™ is an easy-on/easy-off accessory
that take less then 10 seconds to install and fits easily in your glove box
when not in use. The Cool Breeze Scoop™ is molded from an automotive ABS/Polycarbonate
composite plastic. It is non-reflective black with a textured finish. It can
be primed and painted in a color of your choice with flexible bumper paint,
but looks great the way it is delivered.
For more information: www.miatamania.com
(Added 2/25/07)
You'll
want to drive barefoot, all the time, upon installing a pair of our plush floor
mats. Mats are constructed from thick, dense pile carpet with a heavy rubber
ribbed backing to keep them securely in place. Vinyl bound edges look great
in the contrasting logo color or choose black for a subtle look.
For more information: www.miatamania.com
(Added 2/24/07)
Birds
Eye mirrors fit over the factory glass. Aspherically bent, this mirror expands
your field of vision up to three times from 16 degrees to a full 40 degrees
making everything from lane changing to parking much safer. Made with an anti-glare
glass (reduces night glare by 55%), its breakthrough technology provides stepless
vision without double image distortion. No tools, no hassles, just peel off
the backing and apply. The strong adhesive strip provides a solid hold.
For more information: www.miatamania.com
(Added 2/24/07)
Jackson
Racing has developed a new style tensioner for M45 supercharged Miatas and is
now standard in all systems. This new tensenior assembly eliminates belt slipping
issues by allowing for more adjustment, especially useful on higher boost systems.
Belt now runs in the center of the idler pulleys and not to one edge or the
other. Belt changes are simpler and less time consuming. Includes 2 new idler
pulley as well. Power Steering is required for new belt tensioner. Belt sold
separately.
For more information: www.miatamania.com
(Added 2/24/07)
I.L.Motorsport
produced this aluminum sway bar kit for all Mazda MX-5 NC from 2006 and later.
The kit is made in AL7050, includes new bushings and brackets, and will be TÜV
certified for the European market.
The image at the left was taken during the TÜV testing for product stability. After 1,000,000 cycles on the testing machine, bar stiffness suffered no loss. This is a 35% stiffer and 45% lighter sway bar set, and with TÜV testing and certification, it is legal for Europe.
For more information: I.L
Motorsport
(Added 2/16/07)
| Miata.net is a service of Eunos Communications LLC |
Copyright © 1994 - 2008, Eunos Communications LLC.
|